Mounts and Fittings

$57.70
SKU: 7202300
Quantity:

Add a whole new level of versatility to your kayak with GearTrac from YakAttack! GearTrac makes your kayak not only adjustable, but fully configurable, enabling you to change your setup from one outing to the next. Trolling for kings today? Fly fishing tomorrow? Shooting ducks next weekend? GearTrac gives you the ability to go from a fully rigged kayak fishing machine to a flat deck in minutes.

$93.00
SKU:
* length:




Quantity:

Easy and convenient describe the RAM EZY-Mount™ line of products. Utilizing a quick release male to female union, these mounts are absolutely perfect for those who want the most secure, yet rapid release and portable kit possible. How does it work? Mate an EZY-Mount™ male or female component to any RAM cradle or device with the standard AMPS hole pattern. Align the two parts and snap into place. To release, push back the release tab and go.

Material: High Strength Composite

Ball Size: 1" Rubber Ball "B" Size

$10.00
SKU: RAP-326U
Quantity:

RAM Lowrance Elite series mount is lighter and more compact than platform mount types. Suits Lowrance Elite 4 and 5 series

$47.00
SKU: 72023024
Quantity:

Getting your camera pointed in the right direction just got a little easier. The PanFish™ by YakAttack™ features a split mast design with adjustable friction disks that allow quick and easy horizontal panning. Just grab the foam grip above center mast and rotate. Nothing to loosen, nothing to get loose. Just point and let go. Compatible with mighty mount or geartrac ( not included)

$99.00
SKU: 72020055
Quantity:

RAM mount for Fish Finder units. Fits Lowrance Mark, Elite series & Hummingbird 100, 300, 500, Matrix Series. Includes diamond base with backing plate, socket arm and sounder mounting plate. 

$49.95
SKU: 72023021
Quantity:

Use it to attach stuff to your kayak's track system. Whatever you do with your Mighty Mount™, you'll find it does the job. And it does it well. Oh yeah - the best part - it won't hurt your wallet either.

$17.90
SKU: 72020051
Quantity:

$20.00
SKU: SEAR100-04A
Quantity:

Scotty Rod Holder Height Extender plastic shaft. Extends the height of Scotty rod holders 6.5"

$23.95
SKU: 80048003
Quantity:

1" Ram ball wedge mount. Fits securely into Hobie kayak mast adaptor. (ideal for mounting cameras, GPS or sounder units)

$18.95
SKU: 72023016
Quantity:

ScrewBall Threaded RAM Ball and MightyBolt by Yakattack. Ideal for secure accessory mounting on Hobie fishing kayaks

$25.00
SKU:
* Size:



Quantity:

Ram suction cup mount with quick release latch. Made of composite plastic. Idea for mounting accessories to smooth surfaces, such as 'sit-in' kayak hulls, windscreens, etc - virtually any smooth surface. Includes screws for attaching B size or C size mounts. 

$15.00
SKU: RAP-224-1
Quantity:

RAM space saver mount (recommended as a solution for gunwale mounting on Adventure, Revolution & Oasis). Includes nuts/bolts & backing plate

Designed for mounting in front of the paddler, the low profile of this full featured camera mount keeps it out of your way but readily available for trophy pictures or reverse angle video of the big fight. The pivoting head can be positioned at any angle in the horizontal plane. This creates the perfect scenario for "hero" shots. Does not include mounting base to kayak -use mighty mount or geartrac.

$89.00
SKU: 72020056
Quantity:

RAM Universal mount 6 1/4 X 2. Suits various large model sounders, and can be adapted to fit multiple smaller devices

$49.95
SKU: 72023006
Quantity:

Conversion post to allow for use of 1.5" ball compatible RAM accessories from a Scotty mounting base

$24.95
SKU: 72023004
Quantity:

Ram U-Bolt 1” Rail base w/ball. Mounting option for handle bars or similarly shaped tubing (such as the grab rails on the Pro Angler)

$23.95
SKU: 72023017
Quantity:

Scotty Flush Mount. Uses the patented Scotty post mount design for quick removal and adjustable rotation. For all Scotty post mount rod holders.
Dimensions 4” x 2” x 2”
Bolting Dimensions 1 5/16” x 3 3/16”

$15.95
SKU: 80049001
Quantity:

i-accessory mount. Designed for Hobie 'i' series inflatable kayaks. Perfectly suited for use with deck mount Scotty rod holders. Packet includes 2 mounts + glue

$30.30
SKU: 79052000
Quantity:

If you need versatility from a vertical surface but require a horizontal socket the SidePort is the mount for you. Ideally suited for gunwales of smaller tinnies, vertical cockpit wells on kayaks and any other application where you have a vertical surface, but need a horizontal StarPort.

$14.95
SKU:
Quantity:

Mount your Lowrance i-Finder GPS to your kayak

$57.70
SKU: 7202300
Quantity:

Ram Wedge mount 1.5". Fits securely into Hobie kayak mast adaptor. (ideal for rod holder mounting).

$31.00
SKU: 72023015
Quantity:

Scotty Deck/Side Mount. Can be mounted on top or side of gunnel. For all Scotty post mount rod holders. Dimensions: 4” x 2” x 2”. Bolting dimension: 1 5/16” x 3 3/16”

Scotty Rod Holder Height Extender steel shaft. Extends the height of Scotty rod holders 8.5"


$44.95
SKU: 80048002
Quantity:

Strength and convenience, married in a 500 mm rail equipped with 4 StarPorts and two StarPort adapters for mounting. Put your own RAILBLAZA accessories together in a convenient, lightweight system... Then remove the system when you're finished for security, transport or storage! The TracPort Dash 500 comes with 4 StarPorts, 2 StarPort adapters, infill extrusion and all fastenings needed to install and trim the rail.

$129.00
SKU:
Quantity:

The High Strength Plastic Universal Plate has a 1.0" diameter Round Male Button on an Octagon Neck connected at right angles to a 1 1/4" x 2 1/2" Diamond Plate. The plate has two holes 1.912" from center to center, positioned at either tip of the diamond plate. NOTE: This base plate will attach to any of the RAM plastic HOL holders and the industry standard AMPS hole pattern. 

$4.95
SKU: RAP-272
Quantity:

RAM Single socket arm, composite. 1" 'B' size

$14.95
SKU: RAP-B-200-1U
Quantity:

RAM Camera mount with arm & base. 1/4" stud thread to mount most camera types. Includes mounting arm and base

$32.95
SKU: RAM-B-101AU
Quantity:

Double 'C' ball adaptor, used to connect 2 1.5" 'C' sized socket arms


$28.95
SKU: RAM-230
Quantity:

The RAM-219U 1 - 1 1/4" rail mount consists of a 1.5" rubber ball connected that will connect to a pipe tubing diameter from 1" to 1 1/4" in diameter. Highly suitable for mounting to as Pro Angler grab rails

 
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size

$45.00
SKU: RAM-219U
Quantity:

$20.00
SKU: SEAR100-04A
Quantity:

Large ball C 1.5" (2x2.5 base) mount composite. Alternative 1.5" ball mount for RAM products. Made from injection moulded composite. Lighter than aluminium variants and is corrosion proof

1 1/4" - 1 3/4"  rail mount consists of a 1.5" rubber ball connected that will connect to a pipe tubing diameter from 1 1/4" - 1 3/4". 

 
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size

$49.95
SKU:
Quantity:

RAM 'C' base with ball & strap. 1.5" ball attaches to 1/2 - 2" tubes (such as Hobie Island crossbars & akas).

$22.50
SKU: RAM-108B
Quantity:

RAM 'b' base with ball & strap. 1" ball to suit GPS, sounders and RAM camera mounts. Attaches to 1/2 - 2" tubes (such as Hobie Island crossbars & akas.

$23.95
SKU: RAM-B-108BU
Quantity:

1" 'B' size Ram double ball socket arm.

$24.90
SKU: 72023019
Quantity:

The RAM-271U-2, round pipe base, consists of a 1.5" rubber ball connected that will connect to a pipe tubing diameter from 2" to 2.5" in diameter.

 
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size

$69.95
SKU:
Quantity:

The High Strength Composite STANDARD double socket arm has a socket at either end to allow a 1.5" diameter ball accessories to be connected. 

Overall Length: 5.625"

Socket-To-Socket Length: 4.5"

$22.00
SKU: RAP-201u
Quantity:

Large ball C 1.5" (2x2.5 base) mount composite. Alternative 1.5" ball mount for RAM products. Made from injection moulded composite. Lighter than aluminium variants and is corrosion proof

Small ball b 1" mount composite. Alternative 1" ball mount for RAM products. Made from injection moulded composite. Lighter than aluminium variants and is far less corrosive

$9.95
SKU: RAP-B-238
Quantity: